All,

For Group 2 we have to figure out whether the lighting wiring has its own dedicated circuit or not so that we can provide them with the power consumption. Also the granularity of the power value seems important.

Thanks,

-Emre

Modbus PI Interface Documentation

All,

Here is the link to PI Modbus interface.

Thanks,

-Emre

sensors in IBM Lab

sensors in A13

PH.VAV.RMA13.ROOM TEMP (Room Temperature Sensor) [I/O time out]

Porter Hall. A level. A13.Airflow (Airflow sensor) [400]

Porter Hall. A level. A13.CLG Flow Max (Cooling flow maximum value) [ 640]

Porter Hall. A level. CLG Flow Min (Cooling flow minimum value) [ 400]

Porter Hall.A level. Control Setpoint (Control Setpoint) [73]

Porter Hall. A level.A13.Control Temperature (Control Temperature)[72.75]

Porter Hall. A level. A13. Damper Command (Damper Command) [37.6]

Porter Hall. A level. A13. Damper Status (Damper Status) [0]

Porter Hall. A level. A13. Day CLG Setpoint (Day cooling Set point)[74]

Porter Hall. A level. A13. Day HTG Setpoint (Day Heating Set point)[70]

Porter Hall. A level. A13. Day.Night (Day/Night Value)[0]

Porter Hall. A level. A13. DI OVRD SW (Status of the override switch at the room temp sensor) [0]

Porter Hall.A level. A13.Discharge Temp (Discharge Temp) [71]

Porter Hall.A level. A13.Duct Area (Duct Area) [0.55]

Porter Hall.A level. A13.Error Status (Error Status) [0]

Porter Hall.A level. A13.Flow (Flow) [100]

Porter Hall.A level. A13. Flow Coeff (Flow Coefficient) [0.65]

Porter Hall.A level. A13. Flow End (Flow End) [100]

Porter Hall.A level. A13.Flow Setpoint (Flow Setpoint) [100]

Porter Hall.A level. A13.Flow Start (Flow Start)[0]

Porter Hall.A level. A13.Heat. Cool [1]

Porter Hall.A level. A13.HTG Flow Max (Heating Flow Max) [400]

Porter Hall.A level. Area13. HTG Flow Min (Heating Flow Min) [400]

Porter Hall.A level. A13.MTR Setup (Motor Setup) [5]

Porter Hall.A level. A13.MTR2 Timing (Motor 2 Timing)[130]

Porter Hall.A level. A13.Night CLG Setpoint (Night Cooling Set point)[82]

Porter Hall.A level. A13.NIght HTG Setpoint (Night Heating Set point)[65]

Porter Hall.A level. A13.Night OVRD (Night  Override)[1]

Porter Hall.A level. A13.NIght OVRD Time( Night Override Time)[0]

Porter Hall.A level. A13.Reheat End (Reheat End)[100]

Porter Hall.A level. A13.Reheat Start (Reheat Start)[0]

Porter Hall.A level. A13.Setpoint DIAL (Setpoint Dial)[1]

Porter Hall.A level. A13.Valve Command (Valve Command)[1]

Porter Hall.A level. A13.Valve Count (Valve Count)[0]

Porter Hall.A level. A13.Valve Position (Valve Position)[0]

Porter Hall.A level. A13.Wall Switch (Wall Switch)[0]

Porter Hall.A level. A13.Zone Temp (Zone Temp)[72.75]

Porter Hall.A level. A13.Zone Temp Offset (Zone Temp Offset)[0]

Porter Hall.A level. A13.ZOne Temp Setpoint (Zone Temp Setpoint)[73]

Porter Hall.A level. A13.Zone Temp Setpoint Max (Zone Temp Setpoint max)[90]

Porter Hall.A level. A13.Zone Temp Setpoint Min (ZOne Temp Setpoint min)[55]

sensors in A15

Porter Hall. A level. A15.Airflow (Airflow sensor) [404]

Porter Hall. A level. A15.CLG Flow Max (Cooling flow maximum value) [740]

Porter Hall. A level. A.15CLG Flow Min (Cooling flow minimum value) [ 400]

Porter Hall.A level. A15.Control Setpoint (Control Setpoint) [74.25]

Porter Hall. A level.A15.Control Temperature (Control Temperature)[74.75]

Porter Hall. A level. A15. Damper Command (Damper Command) [40.4]

Porter Hall. A level. A15. Damper Status (Damper Status) [0]

Porter Hall. A level. A15. Day CLG Setpoint (Day cooling Set point)[74]

Porter Hall. A level. A15. Day HTG Setpoint (Day Heating Set point)[70]

Porter Hall. A level. A15. Day.Night (Day/Night Value)[0]

Porter Hall. A level. A15. DI OVRD SW (Status of the override switch at the room temp sensor) [0]

Porter Hall.A level. A15.Discharge Temp (Discharge Temp) [75]

Porter Hall.A level. A15.Duct Area (Duct Area) [0.55]

Porter Hall.A level. A15.Error Status (Error Status) [0]

Porter Hall.A level. A15.Flow (Flow) [101]

Porter Hall.A level. A15. Flow Coeff (Flow Coefficient) [0.65]

Porter Hall.A level. A15. Flow End (Flow End) [0]

Porter Hall.A level. A15.Flow Setpoint (Flow Setpoint) [100]

Porter Hall.A level. A15.Flow Start (Flow Start)[0]

Porter Hall.A level. A15.Heat. Cool [1]

Porter Hall.A level. A15.HTG Flow Max (Heating Flow Max) [400]

Porter Hall.A level. A15. HTG Flow Min (Heating Flow Min) [400]

Porter Hall.A level. A15.MTR Setup (Motor Setup) [5]

Porter Hall.A level. A15.MTR2 Timing (Motor 2 Timing)[130]

Porter Hall.A level. A15.Night CLG Setpoint (Night Cooling Set point)[82]

Porter Hall.A level. A15.NIght HTG Setpoint (Night Heating Set point)[65]

Porter Hall.A level. A15.Night OVRD (Night  Override)[1]

Porter Hall.A level. A15.NIght OVRD Time( Night Override Time)[0]

Porter Hall.A level. A15.Reheat End (Reheat End)[100]

Porter Hall.A level. A15.Reheat Start (Reheat Start)[0]

Porter Hall.A level. A15.Setpoint DIAL (Setpoint Dial)[1]

Porter Hall.A level. A15.Valve Command (Valve Command)[0]

Porter Hall.A level. A15.Valve Count (Valve Count)[1]

Porter Hall.A level. A15.Valve Position (Valve Position)[0]

Porter Hall.A level. A15.Wall Switch (Wall Switch)[0]

Porter Hall.A level. A15.Zone Temp (Zone Temp)[74.25]

Porter Hall.A level. A15.Zone Temp Offset (Zone Temp Offset)[0]

Porter Hall.A level. A15.ZOne Temp Setpoint (Zone Temp Setpoint)[74.25]

Porter Hall.A level. A15.Zone Temp Setpoint Max (Zone Temp Setpoint max)[90]

Porter Hall.A level. A15.Zone Temp Setpoint Min (ZOne Temp Setpoint min)[55]

sensors in A17

Porter Hall.A level. A17.Airflow (Airflow sensor) [452]

Porter Hall.A level. A17.CLG Flow Max (Cooling flow maximum value) [452]

Porter Hall.A level. A.17.CLG Flow Min (Cooling flow minimum value) [ 452]

Porter Hall.A level. A17.Control Setpoint (Control Setpoint) [73]

Porter Hall.A level.A17.Control Temperature (Control Temperature)[72.75]

Porter Hall.A level. A17. Damper Command (Damper Command) [53.2]

Porter Hall.A level. A17. Damper Status (Damper Status) [0]

Porter Hall.A level. A17. Day CLG Setpoint (Day cooling Set point)[74]

Porter Hall.A level. A17. Day HTG Setpoint (Day Heating Set point)[70]

Porter Hall.A level. A17. Day.Night (Day/Night Value)[0]

Porter Hall.A level. A17. DI OVRD SW (Status of the override switch at the room temp sensor) [0]

Porter Hall.A level. A17.Discharge Temp (Discharge Temp) [71]

Porter Hall.A level. A17.Duct Area (Duct Area) [0.375]

Porter Hall.A level. A17.Error Status (Error Status) [0]

Porter Hall.A level. A17.Flow (Flow) [100]

Porter Hall.A level. A17. Flow Coeff (Flow Coefficient) [0.54]

Porter Hall.A level. A17. Flow End (Flow End) [0]

Porter Hall.A level. A17.Flow Setpoint (Flow Setpoint) [100]

Porter Hall.A level. A17.Flow Start (Flow Start)[0]

Porter Hall.A level. A17.Heat. Cool [1]

Porter Hall.A level. A17.HTG Flow Max (Heating Flow Max) [452]

Porter Hall.A level. A17. HTG Flow Min (Heating Flow Min) [452]

Porter Hall.A level. A17.MTR Setup (Motor Setup) [13]

Porter Hall.A level. A17.MTR2 Timing (Motor 2 Timing)[130]

Porter Hall.A level. A17.Night CLG Setpoint (Night Cooling Set point)[82]

Porter Hall.A level. A17.NIght HTG Setpoint (Night Heating Set point)[65]

Porter Hall.A level. A17.Night OVRD (Night  Override)[1]

Porter Hall.A level. A17.NIght OVRD Time( Night Override Time)[0]

Porter Hall.A level. A17.Reheat End (Reheat End)[100]

Porter Hall.A level. A17.Reheat Start (Reheat Start)[0]

Porter Hall.A level. A17.Setpoint DIAL (Setpoint Dial)[1]

Porter Hall.A level. A17.Valve Command (Valve Command)[0]

Porter Hall.A level. A17.Valve Count (Valve Count)[1]

Porter Hall.A level. A17.Valve Position (Valve Position)[0]

Porter Hall.A level. A17.Wall Switch (Wall Switch)[0]

Porter Hall.A level. A17.Zone Temp (Zone Temp)[72.75]

Porter Hall.A level. A17.Zone Temp Offset (Zone Temp Offset)[0]

Porter Hall.A level. A17.ZOne Temp Setpoint (Zone Temp Setpoint)[73]

Porter Hall.A level. A17.Zone Temp Setpoint Max (Zone Temp Setpoint max)[90]

Porter Hall.A level. A17.Zone Temp Setpoint Min (Zone Temp Setpoint min)[55]

There is some bacnet stuff in A17/15 like follows but I dont know if they are meaningful

BACnet_PORTERPXCM01_PH.AHU.RMA17D..VAV.HWF (Variable Air Volume Hot water supply flow ) [5.97]

BACnet_PORTERPXCM01_PH.AHU.RMA17D..VAV.HWF.2 (Variable Air Volume Hot water supply flow ) [5.1050]

BACnet_PORTERPXCM01_PH.AHU.RMA17D..VAV.HWF.PRESENT VALUE (Variable Air Volume Hot water supply flow Present Value ) [5.0825]

BACnet_PORTERPXCM01_PH.AHU.RMA17D.CCV (Chilled Water Valve Signal)[7.43]

BACnet_PORTERPXCM01_PH.AHU.RMA17D.CCV.2(Chilled Water Valve Signal)[3.55]

BACnet_PORTERPXCM01_PH.AHU.RMA17D.CCV.PRESENT VALUE (Chilled Water Valve Signal)[7.488]

BACnet_PORTERPXCM01_PH.AHU.RMA17D.CC(Chilled Water Valve CMD)[74.52%]

BACnet_PORTERPXCM01_PH.AHU.RMA17D.CC_.2(Chilled Water Valve CMD)[36.26%]

BACnet_PORTERPXCM01_PH.AHU.RMA17D.CC_.Present_Value(Chilled Water Valve CMD)[74.52%]

FLIR IR is working

All,
We have rendered two "cool" images using our thermal camera.
Enjoy,

Mati and Emre

Meeting minutes 9th February

Time: 3-4

For next week get access to Enersure. Maybe get in touch with Joe. Kurt is willing to give the keys.

Suman: read up the paper, access PI server and figure out what sensors we have and what we don't

access PSII3 using 

Emre: need to find out how to query sensor data from PSII3

IP for Remote Desktoping into PSII3 computer: 128.2.76.208

Update on Enersure

All,

Matthew said that he has to get a confirmation of FMS to provide us with a key to access the mechanical room in the IBM Lab.
Jules forwarded our request to put an ethernet outlet to FMS as well.

I will wait a couple of days to hear from them.

Thanks,
Emre

Thermal Camera Specs

All,

Here is the link for the thermal camera specs:

Flir Specs

kinect code

Here is a link to the labview hacker website for an initial code for Kinect.

http://labviewhacker.com/kinect.php

Meeting Minutes and Task Distribution

All,

Here is the task distribution we have agreed on:

Emre & Suman
Finalize the comparison with available data points in PI Server and suggested by literature.
Check the Enersure whether it is working or not and start dumping data to PI Server. (I have sent an e-mail to Jules on this issue)

Matineh & In Soo
Thermal Camera will be tested.

We are meeting regularly on Thursdays at 3PM in the lounge.

Thanks

Emre